American access system ADV-1000 Guía de usuario descargar pdf (Pagina 349)

100

101

349

Click Add in the ADV area (upper right) and enter

the necessary information. When the ADV is

completed, click OK to return to the panel dialogs

and complete the panel definition. The ADV name is

now assigned to the output.

Note: In the ADV definition, there are three states listed

for an output point: energized, de-energized, and trouble.

In the case of an output point, trouble means that WIN-

PAK cannot determine if the output is energized or de-

energized.

When an active output point is selected the

following options are available:

Time Zone: To turn an output point on during a

particular time zone, select that time zone from this

list.

First Valid Read Activates Time Zone: This

feature ensures that the Output does not turn on

at the beginning of the Time Zone but on the

first valid card used thereafter. At the end of the

Time Zone, the output will turn off

automatically (E.g. Snow day). Selecting a Time

Zone for the output enables this feature.

Pulse Time: Enter a value here (in seconds, minutes

or hours) to set the amount of time that the output

point is energized when triggered. This can be any

value from 0 to 63.

Interlocking: In the case of output points,

interlocking is linking the changing state of the

output to either an input, another output.

Enabling Interlocking for Outputs

1 Select an output from the output point Name:

list, and then select the Interlocking check box.

2 Select I or above the Point: option, to indicate

input point or output point respectively.

Programming

1 2 ... 344 345 346 347 348 349 350 351 352 353 354 ... 776 777

Comentarios a estos manuales

Sin comentarios

American access system ADV-1000 Guía de usuario Pagina 349

Comentarios a estos manuales