American access system ADV-1000 Guía de usuario descargar pdf (Pagina 347)

100

101

347

Report Alarms: If the selected input point is

unsupervised, you can choose from Never or Always.

If the input point is supervised, the Trouble option is

also available, which would report only Trouble

conditions (typically to detect tampering).

Interlocking: In the case of input points,

interlocking is linking the changing state of the input

to either another input, an output.

Enabling Interlocking for Inputs

Interlocking allows you to interlock a selected input

point with another input point, an output point, or a

group of output points.

When an input point is interlocked to an output

point, and there is a change of status in the input

point, the system performs the operation specified.

1 Highlight an input and then select the Interlock-

ing check box.

2 Choose either the Input (I), Output (O), or

Group (G), radio button to indicate the point

type with which to interlock.

3 Select the interlocking point from the Point: list.

(Only input points or output points that have

already been activated appear on this list. If the

point you need is not listed, go to the correct

dialog and activate the point, then return to this

screen).

4 Select the Alarm Action for the interlocked

point. This is the action that the second point

will take when the initial input becomes active.

The choices for both Normal and Active actions

are No Action, Energize, De-energize, Pulse,

Follow.

5 Select the Normal Action for the interlocked

point. This is the action the second point will

take when the initial point returns to normal

status.

Programming

1 2 ... 342 343 344 345 346 347 348 349 350 351 352 ... 776 777

Comentarios a estos manuales

Sin comentarios

American access system ADV-1000 Guía de usuario Pagina 347

Comentarios a estos manuales