American access system ADV-1000 Guía de usuario descargar pdf (Pagina 195)

100

101

195

12 Click Print to print the summary, or click Finish

to exit the Wizard. If necessary, scroll down to

access the Print and Finish buttons.

When you are done using the wizard, initialize the

panel(s) that were just added. To initialize the

panel(s) click on Operations then Control Map and

click on the plus sign (+) by Quick Start Control

Area to open up the branch. Right click on the panel

that was added and select Initialize, Select All and

click OK. A panel initialization status window will

display the initialization progress. Repeat the

procedure for as many panels as were added to the

system. Multiple panels can be initialized at the same

time on an RS-485 line, if C-100 is being used,

initialize one panel at a time.

If this is a first time the wizard was run and there

were no previously defined WIN-PAK

communication ports, then the communication

server needs to be restarted. Restart the

communication server by stopping it from the WIN-

PAK Service manager and then start it. An error

indicating that communication server is not

responding will appear [if the WIN-PAK User

Interface is open]. Click OK.

When the communication server is started, another

message will appear several seconds later indicating

that it is now working. This procedure only needs to

be done once, the first time. All other additions

made by the wizard will become available

immediately after the wizard is finished.

Programming

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 776 777

Comentarios a estos manuales

Sin comentarios

American access system ADV-1000 Guía de usuario Pagina 195

Comentarios a estos manuales