American access system ADV-1000 Guía de usuario descargar pdf (Pagina 318)

100

101

318 WIN-PAK User Guide

The inputs on an PW-2000 with an AEP-5

default to normally closed, supervised circuit to

monitor changes of state.

PW-2000-III/IV inputs can also be configured for

normally open circuits and 3-state supervised

circuits.

Select the Supervised check box to configure

the selected input point as supervised. Then

select either the Normally Open, or Normally

Closed radio button.

7 If the selected input point is unsupervised, you

can choose to Report Alarms Never or Always.

If the input point is supervised, the Trouble

option is also available, which reports only

Trouble conditions.

8 Create an ADV for each input point. Click the

Add button in the upper right corner of the

Inputs window, and set priorities for each state

you want to monitor.

9 On returning to the Inputs window [after creating

ADVs for the input points to be monitored] click

Next to advance to the Panel Configuration -

Outputs window.

Enabling Interlocking for Inputs

Interlocking allows you to interlock a selected input

point with another input point, an output point, or a

group of output points.

When an input point is interlocked to an output

point, and there is a change of status in the input

point, the system performs the operation specified.

1 Highlight an input and then select the Interlock-

ing check box.

2 Choose either the Input (I), Output (O), or

Group (G), radio button to indicate the point

type with which to interlock.

1 2 ... 313 314 315 316 317 318 319 320 321 322 323 ... 776 777

Comentarios a estos manuales

Sin comentarios

American access system ADV-1000 Guía de usuario Pagina 318

Comentarios a estos manuales