American access system ADV-1000 Guía de usuario descargar pdf (Pagina 223)

223

4 Select an Action from the list (e.g. Server

OK, or Server Trouble). This list varies

depending on the type of device being

configured. Refer to the "ADV Action

Groups" section of this chapter for examples.

Each action [Alarm, Normal, Trouble etc]

requires a priority setting to be viewed in the

Alarm monitor.

5 Set the Priority you want assigned to the

selected Action. If the priority is 0, the

action state will not be displayed in the

Alarm monitor, Control Map or Floor Plan

view. [1 is the highest priority, 99 is the

lowest.]

6 Select the Time Zone during which you

want the Action Group activated. The

default setting is Always, meaning the de-

fined actions take effect regardless of the

time.

7 Select the Write to History option if you

want the event written to the history file.

8 Select the Print option is you want this event

printed on the alarm printer.

9 Select any Command Files you want

activated in response to the selected Action.

A command file must be created to perform

the CCTV camera/monitor switching.

10 If a Sound File is to be activated in response

to the Action, it is selected here. Sounds will

only play if the event is displayed in the

Alarm View.

11 Insert the Message you want sent to the

Alarm Details window in response to the

Action.

Programming

1 2 ... 218 219 220 221 222 223 224 225 226 227 228 ... 776 777

Comentarios a estos manuales

Sin comentarios