American access system ADV-1000 Guía de usuario descargar pdf (Pagina 314)

100

101

314 WIN-PAK User Guide

1 Enable or disable the Advanced Options as

necessary for your panel configuration. Items

listed in the Advanced Options area of the

window are dependent upon selections made

earlier in the configuration process.

2 When you have selected all desired Advanced

Options [explained in the following section],

click OK to return to the Options window.

3 Click Next to advance to the Panel Configura-

tion - Inputs window (next illustration). Descrip-

tion of OptionsDescription of Options.

Multiple Interlock Protection (MIP): Available

with all PW-2000 series panels. Requires that all

input points tied to a single output return to a

normal state before the output is de-energized.

Without MIP, just one input returning to the normal

state de-energizes the output.

PFR (Power Fail Reroute): Only available with the

PW-2000-II using AEP-5. Allows Input 8 [Primary

Power] to be rerouted to Input 9 [Primary Power -

System Alarm] freeing up Input 8 on the AEP-5 to

be used as a stan,dard/supervised input point.

OL (16 bit card number plus site code): Available

with all PW-2000 series panels. Creates Wiegand card

numbers by concantenating the site code with the

card numbers. The result is transmitted as a 12-digit

number. Do Not add site codes to the panel with

this option.

The OJ and OL options are mutually exclusive. They

cannot be used at the same time.

OJ (20 bit card number plus site code): Only

available with 8.03 firmware or higher. Sets the format

for 20 bit card numbers. The first 12 bits are interpreted

as the site code and the last 8 as the card number. The

card number is sent to the head end software as a 12-

digit number.

1 2 ... 309 310 311 312 313 314 315 316 317 318 319 ... 776 777

Comentarios a estos manuales

Sin comentarios

American access system ADV-1000 Guía de usuario Pagina 314

Comentarios a estos manuales